The Lambda is a Nodal Swing Head ideally suited for 35mm Film cameras fully equipped with long lenses, mattebox and extra large film magazines.
Providing a high level of operational flexibility, this Fluid Head can be easily fitted to a wide range of supports including tripods, dollies, cranes and camera cars. The mounting can be inverted in under-slung position for low line positioning and allow the camera to be moved all the way to the ground and provide for accurate images which normally cannot be obtained with other traditional supports.
The balance system is designed so that the camera may swing on its center of gravity and rotate 360° on its vertical axis. No springs or similar counter reaction elements are required to set the head in a fixed tilt position and fluid pan and tilt movements have the same identical feel. The lens focal distance can be kept constant by presetting the fore and aft horizontal sliding plate.
The Lambda employs the patented Cartoni fluid drag control system on both pan and tilt modes. In order to obtain the 3rd Axis rotation, the Lambda features the 3rd Axis accessory comprising an additional fluid drag system with 7 steps + “0”.
A variety of accessories as the orientable extendable pan bar, the round steering wheel, the short pan handle. the 150 mm bowl base, the counterweights and rods for nodal setting complete the equipment.
|Maximum Payload Capacity||40 kg – 88 lbs|
|Minimum Payload Capacity||0 kg|
|Weight||21.0 kg – 46.3 lbs|
|Fluid Drag||7 steps + 0|