Kino Flo Barfly:

Kino Flo packs a lot of soft light into its new blade-thin Barfly’s. The brighter, smaller, lighter Barfly’s deliver more lumens per square inch than any other full-spectrum fluorescent source on the market. The new Barfly’s are compact and controllable lighting sources that can squeeze in to tight spots for difficult shots on location or in the studio.

Features:

BarFly Fixture

• Metal fixture with 12ft
  
• (3.6 meter) tail
  
• Twist-on, locking center mount
  
• White reflector
  
• Gel frame
  
• Honeycomb Louver, 90 °
  
• True Match daylight and
  
• Tungsten lamps

BarFly Ballast

• HO/Standard Switching
• Flicker-free, remote operation
  
• Individual lamp control
  
• Instant-On, dead quiet
  
• Hook for mounting on stand

Cotelux lights:

As the most polyvalent projector, this model is perfect for lectures, lighting interviews or for small scenes with two or three actors. Also used in low ceiling studios where space must be well-exploited or for low power installations requiring minimum consumption.

This model is supplied with two mirror-polished leaf barndoors for the focusing of the light, and a ball and socket joint in order to use the system vertically or horizontally. The ballast is integrated in the same fixture and the light is easily dimmable through local regulation.

Features:

• 120V Ballast
• Available in double and single bank fixtures
• Uses Kino Flo colour balanced compact tubes
• Dimmable

Arri Fresnel Fixtures:

The ARRI Fresnel series is ideal for use where compact, light weight tungsten Fresnel spotlights are required. Arri Fresnels are the perfect solution in small studios where grid height is a problem. The classic ARRI construction of corrosion resistant extruded and die cast aluminium maximises body strength while maintaining the light weight of an ideal location fixture. Despite the small size, short focal length lenses with wider angles give more light output and better light distribution over the full beam area. Arri Fresnels are available in both manual and Pole Operated version.

Features:

• Come in 6 sizes (5k, 2k, 1k, 650w, 300w, 150w)
• Available in kit packages (including case & stands)

Lowel Rifa Lite:

Creating beautiful soft key or fill light doesn't have to be strenuous or time consuming. Compact, lightweight, & self-contained, the Rifa-lite uses a simple design approach as old as the umbrella to achieve its quick & easy setup and strike capabilities.

Features:

• Available in 4 sizes 44, 55, 66, 88

KINO FLO Kamio 6 Ring Light: LINK TO KINO FLO.COM

The lightweight Kamio 6 ring light fixture lives on the barrel of most film on Broadcast cameras. The light features a full range dimmer that tunes the beam while detachable frech flags reduce flare, delivering perfict pitch. The Kamio is designed to produce a soft source directly in front of the talent producing a shadow free face without hurting their eyes. As well because the Kamio uses both daylight and tungsten balanced true match lamps, there is no need to use color teperature chnaging gels, which produces light loss. For more information on this light contact Lorne Lapham Sales & Rentals.

Features:

Ballast Specifications

• Input Voltage: 12VDC
• Power Rating: 12VDC = 37W @ 3amps 15VDC = 50W @ 3.3amps
• Switching: On/Off
• Output Frequency: 25kHz
• Size: 5.21" x 3.35" x 2.8" (132.6mm x 85mm x 73mm)
• Weight: 1.17lb. (0.533Kg)
• Weight with MTP-141 Mount: 1.3lb (0.587Kg)
  Fixture Specifications
• Part Number: KAM-6
• Dimensions: 9.1" x 9.9" x 2.5" (230mm x 251mm x 62mm)
• Mount Type: Clip onto lens
• Filter Stations: 2 Weight with Lamp: 1lb. / .45Kg
• Weight with lamp & barn doors: 2.07lb / .939Kg
  

Photometric Specifications

KINO FLO Parabeam 400: LINK TO KINO FLO.COM

The unique beam structure produces denser shadows than Kino Flo's traditional line of production lighting systems, renown for near shadowless, illumination. A ParaBeam luminaire, depending on it's orientation, can create or erase shadows on the set.
The ParaBeam 400 operates four 55 vwatt compact True Match lamps. It puts out more light than a 3K tungsten softlight, but uses under two amps or power. The ParaBeam can be Turned off or on and is equiped with a dimmer that can be Manualy or remotly controled by a optional DMX control board. For more information on the 400 or 200 ParaBeam please contact Lorne Lapham Sales & Rentals.

Features:

Fixture Specifications

• Part Number: PAR-400-120 (230v available)
• Dimensions: 24.21 x "24.61" x 7" (615mm x 625mm x 178mm
• Weight with Lamp: 22.1Ibs/10KG
• Input Voltage: 120VAC 50.60 Hz
• Output frequency: >30kHz
• Amperage: 2.14A (120vAC/60Hz)
• Dimming Range: 100 to 5%
• Lamp Types: 4 x 55w CFL (55K or 29K color tempatures available)
  Photometric Specifications

FREZZI Micro Fill Camera Light: LINK TO FREZZI.COM (PDF FILE)

When looking for an economical on-camera light kit that does not sacrifice professional quality, the new Micro-Kits are a great choice. All lightheads include a bulb and all necessary mounting hardware for camera shoe, 1/4-20 thread or 1/2" stud mount. A full line of accessories are available for the Micro-Fills including lightboxes and bran doors. The Micro Fill is easy to install and built with professional quality and durability. Contact Lorne Lapham Sales & Rentals for further details.

Features:

• Compact, lightweight, ruggedized camera top lighting.
• Universal shoe mount, 1/4-20 thread, 1/2" stud mount included.
• Quality construction with professional features.
• Available with all commonly requested connectors.
• 3 models: ON/OFF, Dimmer, HMI DAYLIGHT (5600K).

DEDO LIGHT 150w AC with dimmer: LINK TO DEDO LIGHTS.COM

The self-contained Dedolight DLHM4-300 works with an integrated 150W electronic transformer. An internal dimmer is provided. The light head may also be externally dimmed through most dimming systems designed for use with electronic power supplies. Available in four primary voltage ranges: 120V (DLHM4-300U), 230V (DLHM4-300E), 240V (DLHM4-300E+), 100V (DLHM4-300J).

Features:

DLHM4-300 Specifications
• Optics: New Dedolight Asperics2 optics drastically improves light output
• Power In: 24V/150W integrated electronic power supply
• Dimmable: 0 to 100% Weight: 2.2 lb. (1.02 kg)
• Max wattage: 150W
• Beam control: Continuously variable
• Mounting: To any 5/8" (16mm) stud
• Operating position: Any except upside down