Lorne Lapham Sales & Rentals Inc.
New Products
Home Sales Rentals Clearance-Used Gear Whats New News
> What's New For more info give us a call-604.298.3224
Camera Accessories:

Dolgin TC400 Battery Charger

  • Accepts Panasonic CGP (DVX100/HVX200 etc.), Sony L/M NPF970 (VX-2100/PD-170/HVR-V1/HVR-Z1 etc), Canon BP (XL2 etc.) and many other battery packs (each configuration comes with its adapter plate as ordered.)
  • Fast, safe simultaneous charge; high capacity battery packs (up to 6 AH) are ready in about 3.5 hours. As a battery being charged, charge status is displayed in Volts, Ah (as counted by the charger fuel gauge) and percent of charge (estimated, using proprietary algorithm)
  • Digital LCD display indicates the battery pack capacity, if fully discharged before insertion.
  • Each of the 4 channels is fully independent of the others, batteries can be inserted/removed at any time.
  • A built-in Battery Test/Discharge Module cycles the pack through charge-discharge-charge, reports true capacity as tested (optional)
  • Worldwide 100-240V AC or 12V DC car power
  • A 7.2V DC output for camera operation from AC mains or 12V DC power source (optional)
  • Small lightweight package
  • Warranty 2 years parts and labor

 


dolginquad

Ikan V8000HD 8" HD LCD Monitor:

The Ikan V8000HD is an 8-inch diagonal High Definition video monitor with a widescreen LCD panel. This is a high quality unit capable of displaying images in 1080i, 720p, and 480p. It includes BNC component, S-Video, and BNC composite inputs. It also comes with built-in support for "L" Series batteries.

Features:

  • High Definiton & Standard Definition
  • Wide Viewing Angles
  • 16:9 & 4:3 Aspect Ratios
  • Component, S-Video, & Composite Inputs
  • Video Pass-Through for all Inputs
  • Built-In Support for “L” Series Batteries 
  • Anti-Glare Screen
  • Auto Off Feature
  • On-Screen Display Control
  • Multi-System NTSC/PAL

Panasonic 16gb P2 Cards:

Neither a tape nor a disc, P2 is pure solid-state - with no mechanisms or moving parts. P2 is rugged and virtually impervious to the enviromental extremes of temperature, vibration, or shock. And P2 is rewriteable up to 100,000 times. Now with the introduction of the 16gb P2 cards you are now able to record up to 42 minutes of continuous 720p 24pn DVCPRO HD footage.

Features:

  • 42 minutes record time in 720p 24pn
  • 16 minutes record time in 1080i 24p
  • Requires software update to some HVX-200 cameras *download update

Noga Accessory Arm:

When using the articulating arm a monitor can be turned to any angle to provide you with the clearest view. Raise or lower; tilt up or down; swing the screen to get the angle you require. Feature a 3-jointed articulating arm and a unique central locking mechanism for instant fixation in any position.

Specs:

  • Mounts - 7" monitors with battery, 8.4" monitor without battery
  • Length - 8.3"
  • Holding capacity - 4.5 lbs.
  • Available with 1/4" to 1/4" & 1/4" to 3/8" ends

Available in Small, Medium, and Large sizes


Bebob Foxi Follow Focus:

Foxi by bebob is a professional remote device for control of Focus and Iris. It is designed for use only with Panasonic DVX100B and HVX200 cameras. The Focus knob is designed in similar style to a Follow-Focus knob with a diameter of 60mm with an approximate 270 degrees of rotational travel. A built in non adjustable fluid friction allows slow, accurate and repeatable Focus control movements.

Control Features:

  • Focus (rotating knob)
  • Switching between Auto-Focus and Manual-Focus
  • Iris (slider paddle)
  • Switching between Auto-Iris and Manual-Iris

 

Coco DC Converter for Sony L-Series camcorders(7.2V to 12V):

The first power adaptor that allows the user to power the camera, a 15watt 12volt camera light and a wireless lavaliere off of one high capacity L-Series battery.
The new coco DC power converter finally gives the DV camera operator the full freedom of using a small compact DV camcorder.

Features:

  • External power taps: 1 Anton Bauer dual angle power taps 12volt up to 15watt, 1 Herosie 4 pin 7.2volt output port.
  • Type of batteries used: Sony L-Series batteries (NPF-970 batteries are recommended).
  • Construction: CNC Machined plastic
  • Model compatibility: All current Sony L-Series compatible camcorder. Will not work with the VX-1000 camcorders.
  • Estimated run time fully loaded: 1.2 hours with light and wireless system on during recording on camera.

Click on image for larger version

Zoe Lanc Control for Panasonic and Sony cameras:

The Zoe Lanc control is available for Sony and Panasonic DV camcorders with an available LANC protocol port.
The Sony Lanc (blue) enables user to control both Zoom and f ocus, as well has a Start/Stop and On/Off buttons. The rocker switch is pressure sensitive and allows for slow to fast zoom or focusing. An quick focus button is also available.
The Panasonic Zoe Lanc (White) is a Zoom control only due to Panasonic not supporting focus via LANC protocol (Except AG-DVX100B and AG-HVX200 models). The control has the same Start/Stop, On/Off features as the Sony model (blue). The Lanc also has speed selection and range limits. Both Lanc model swill mount on most

Features:

  • Compact simple design.
  • Tight locking onto most tripod handels.
  • Sony and Panasonic models available (No Canon or JVC at this point).
  • Runs off of camera power.
  • Pressure sensitive.

 


Click on image for larger version

V-R70P-HDA 7" HD Marshall LCD Monitor:

The V-R70P-HDA The V-R70P-HDA features our completely Digital TFT-MegapixelT high resolution LCD screen with 1.2 million pixels, V-Mount battery adapter, 4 pin XLR power jack, and optical grade polycarbonate screen protection. Analog signals are digitized using an advanced 10 bit process with 4x over sampling and adaptive 5 line comb filter plus exacting color space conversion. Video is scaled to fit on screen in the highest resolution using a state of the art LSI that incorporates 4 x 4 pixel interpolation with precision Gamma correction to product the best images available.

Other HD models are available (HDSDI)

Features:

  • Display (Viewing Area): 7" (6.14" x 3.27")
  • Resolution (Pixels): 800H X 480 V RGB
  • Dot Pitch: 0.065mm X 0.175mm
  • Brightness (in cd/m2): 380 cd/m2
  • System: NTSC/PAL auto recognition
  • Inputs: 1 Composite, 1 Component HD/SD
  • Dimensions:7.6"W x 5.16"H x 2.16"D
  • Approx. Weight: 1.8 lbs
  • Power Consumption: 10-17 VDC, 600 mA
  • Power Inpus: 12 VDC, 600 mA or V-Mount for Sony or IDX batteries
    Anton Bauer Adaptors are available.

Click on image for larger version

Denecke TS-C Time Code Slate:

The Denecke TS-C is a compact full featured smart slate, capable of reading, generating and displaying SMPTE/EBU time code. Its new compact size makes the TS-C ideal for documentary work, insert shots, or anywhere a big slate is too cumbersome. The TS-C jams to all standard frame rates, including 23.976 for HD. The TS-C reads and displays off speed time code used in special situations such as music video playback. The time code reader mode works with both ascending and descending time code. The TS-C is the first Denecke product to support Aaton serial communication! The precision TCXO combined with a 16 BIT microprocessor ensure extremely low drift and high accuracy. The standard EL backlit face plate is helpful in low light situations. The new Denecke TS-C compact slate is affordably priced. Your choice of black and white or color clapper sticks.

Features:

  • Aaton serial communication: via 5 pin Lemo plug.
  • Weight: under 2 lbs. with batteries.
  • Sync: TCXO Crystal.
  • Slave: Auto set frame rate.
  • Sliding access door to controls and quick load battery pack.
  • Sync error display.
  • EL backlight display -- illuminates scene, take and production section of the face plate.
  • Blinking LED jam indicator.
  • Battery voltage readout.
  • Re-jam without powering down.
  • Display intensity: variable in 12 steps.
  • Size: 5.00" x 8.25" x 1.24"
  • Weight: 1.90 lbs. with batteries
  • External Power: 5.7v to 16v DC
  • Battery Pack: 6 alkaline "AA" batteries

Custom power adaptor for 12 volt devices: No Link available

The Custom power adaptor is one of the first small sized integrated power adaptors for powering most12v low draw electronics. The power tap was designed to power any 12v ready LCD, light, transmitter, receiver or other small 12v production equipment. Give us a call for more information on this device.

Features:

  • Compact simple design.
  • Tight lock.
  • Designed for both M-Series and L-Series Sony batteries.
  • Internal 12v converter.
Phone 604.298.3224 Fax 604.298.2023 Address 3774 Napier Street
Burnaby, BC
V5C-3E5
E Mail info@llsr.com